The 7 Best Bow Quivers of 2026

The worst sound in a treestand isn't a snapped twig—it's an arrow sliding free of a loose quiver and clattering down the trunk. A bow quiver has one job: keep arrows silent, secure, and close at hand from the truck to the stand and back again. But the wrong one adds noticeable wobble to your bow, snags on every branch you pass, or lets arrows work loose on the walk in. The right quiver should disappear on your rig until the moment you need another arrow.

I've carried everything from bare-bones four-arrow models to full six-arrow rigs, and I've learned that arrow count is the least interesting thing to argue about. After eight months with 12 quivers, our team found that retention, mounting stiffness, and hood quietness separate the good from the frustrating. A few now include built-in lights for pre-dawn walks, which is a nice touch—but only if the quiver still holds arrows tight when you turn it upside down.

You don't need the most arrows; you need the ones you carry to stay put and come out clean when you draw. The picks below were chosen for hunters and target shooters who move—through brush, up ladders, across a range—not for someone leaving a bow on a bench. If your current quiver rattles when you shift your weight, you'll know why by the end.

Our Top Picks

The 7 Best Bow Quivers of 2026

1

G5 Head-Loc 6 Best Overall

G5 OUTDOORS Head-Loc Quiet Low-Profile Archery 6-Arrow Quiver with Exo-Flex

Broadhead hunting

Field Score 91/100
Hood
Exo-Flex quiet hood
Mount
Adjustable compression bracket
Capacity
6 arrows
Broadheads
Fixed and mechanical
View on Amazon

Mechanical broadheads are why this quiver sits at the top of our list. The Power-Grip double spreader grips each arrow by the shaft rather than letting the blades take the load, so a mechanical head rides in the hood with nothing pressing on it, and fixed heads get the same secure seat. That one design decision makes it the safest hood here for anyone who hunts mechanicals.

Six arrows is the most in this group, matched only by the Mathews, and the mount is the other half of the story. A rubber compression bracket isolates the quiver from the riser, which is where the ringing noise in a bow-mounted setup usually starts, and the Exo-Flex hood is soft enough that seating an arrow doesn't announce it. The aluminum frame reads as hardware rather than something clipped on for the season.

The bracket rotates and slides, so the quiver can sit low and tight against the riser instead of standing out where it catches brush, and the whole body lifts off in one motion at the stand. We paid close attention to that detach on every quiver here, because it's the part you use in the dark with cold hands.

Six arrows also means a bigger hood and a longer body than the four-arrow quivers here, and that size shows when you're threading through cedars to a stand. It's bulk you carry all season for arrows you may never draw, which is a trade a four-arrow hunter simply doesn't have to make.

Worth Noting

  • Gripper slots are very tight when new
Our Verdict

The quiver we recommend first for hunting: the spreader grips arrows by the shaft so fixed and mechanical heads both ride safely, and the rubber bracket keeps it quiet.

Check Latest Price
2

Trophy Ridge 5-Spot Best Value

Trophy Ridge 5-Spot Arrow Quiver

Compound hunting setups

Field Score 90/100
Mount
Quick-detach bracket
Weight
9.1 oz
Capacity
5 arrows
Grippers
Adjustable dual grippers
View on Amazon

The loop at the top of the 5-Spot is a detail that only earns its keep once you've hunted with it. Pop the quiver off the bracket, hang it on a limb or a hook at the stand, and your arrows are off the bow and out of the way until you need them.

At 9.1 ounces this is the lightest five-arrow quiver here, and that's the figure that decides whether a quiver feels like part of the bow or like a bag hanging off the side of it. The body is a molded copolymer, which keeps it quiet when a limb tip ticks it, and the dual grippers can be set for the tension you want.

Where it earns the value label is the sum of small things: a soft-touch hood that swallows the sound of an arrow going in, a detach bracket that comes off clean, and grippers that hold a standard carbon without any rattle. The finish is plain and the hardware is basic, which is the whole point of a quiver at this end of the range.

Worth Noting

  • Tight grippers won't take 4mm shafts
Our Verdict

Our value pick for compound hunters: light for a five-arrow, quiet, quick to detach, and the one we suggest to anyone who hasn't decided what to spend.

Check Latest Price
3

Trophy Ridge Hex Light Best for Low Light

Trophy Ridge Hex Light Archery Arrow Quiver

Low-light hunting

Field Score 89/100
Mount
Adjustable quick-attach
Weight
16 oz
Capacity
5 arrows
Lighting
Built-in LED lights
View on Amazon

Walking in before first light, the useful part of the Hex Light is the LED inside the hood: it lights the nock ends so you can index an arrow without a headlamp in your teeth, and a second light on the outside doubles as a small walk light.

Sixteen ounces is the cost. It's the heaviest five-arrow quiver here, and hanging that off one side of the riser is something you notice at full draw on a bow that felt balanced without it. What you get for it is a hood that stays genuinely useful in the last minutes of legal light.

Full-size fixed blades are the squeeze: a wide three-blade head doesn't fit every slot in the hood, so you end up loading around it. Mechanicals and slim fixed heads sit fine, and that covers most of what a late-season archer carries.

Our judgment: if your season regularly runs past sunset, the Hex Light solves a problem nothing else on this list touches, and it's worth the weight and the money to solve it. If you're usually back at the truck by dark, the 5-Spot does everything else several ounces lighter.

Worth Noting

  • Quick-release fit can loosen over time
Our Verdict

For dark walks and late sits the built-in LEDs earn the extra weight and cost; if your hunts end before dusk, the same money buys a lighter quiver.

Check Latest Price
4

CBE Tactic 5 Best Sight-Mounted

CBE Tactic 5 – Tactic 5 Quiver

Sight-mounted setups

Field Score 88/100
Mount
Sight-mounted cam lock
Weight
13.8 oz
Capacity
5 arrows
Broadheads
Fixed and mechanical
View on Amazon

The Tactic 5 bolts to the sight rather than to a riser bracket, which puts the load inboard, close to the bow's centerline, and keeps the arrows from hanging out where they catch brush. That's a real advantage on a compact setup, and it only works if your sight carries the mounting holes.

The clamp is the part worth admiring. A cam-locking lever pulls it tight against the base and releases with one hand, and the vertical adjustment slides the body until the hood clears your sight housing. It goes on without a fight, which isn't true of every bracket in this group.

For the money it's the most clever mounting here, and five arrows hold tight enough that nothing shifts on the walk in. It's the pick when your sight already has the holes and you want the quiver out of the way of everything else.

Worth Noting

  • Arrows can lean in the gripper when full
Our Verdict

We like it for bows with sight-mounting holes: the cam lever locks hard and releases one-handed, and the quiver tucks in close instead of hanging off the riser.

Check Latest Price
5

Apex Gear Reactor LTE Best for Small-Diameter Arrows

Apex Gear Reactor LTE 5 Arrow Quiver

Micro-diameter arrows

Field Score 87/100
Hood
Silicone-lined hood
Mount
Height-adjustable bracket
Capacity
5 arrows
Grippers
Thumb-tab gripper
View on Amazon

Micro-diameter arrows are the whole reason to look here. A .166 shaft sits loose in grippers cut for standard carbons, and a loose shaft clicks against the hood every time you shift your hand. The Reactor's thumb-tab gripper is the one in this group that holds them snug from the first shot.

The hood is lined with silicone, which does two things we care about: it quiets the sound of an arrow seating, and it doesn't dull a blade the way a hard plastic hood can. The bracket adjusts for height so the hood clears the sight, and the whole thing comes off quietly when you reach the tree.

It holds five arrows rather than six, and it sits between the budget quivers and the Head-Loc without offering a broadhead spreader. If your arrows are standard diameter, the 5-Spot does this job for less and the G5 does more for a little more.

Our Verdict

Our pick for micro-diameter shafts: the thumb-tab gripper holds .166 arrows where others let them slip, and the silicone hood keeps the pull quiet.

Check Latest Price
6

Mathews HD 6 Best for Mathews Bows

MATHEWS 6 Arrow Black HD Quiver

Mathews bow owners

Field Score 86/100
Finish
Black
Weight
13.9 oz
Capacity
6 arrows
View on Amazon

Mathews builds the HD 6 for its own bows, and it shows: the finish matches the riser, the body lands where the factory mounting points put it, and six arrows ride in a hood that doesn't look bolted on as an afterthought.

It's also the most particular quiver here about what it attaches to. On newer risers it lines up and drops on; on some older ones it needs additional hardware that isn't in the box, so find out what your riser requires before you order rather than after.

For a Mathews owner who wants the quiver to look and fit like original equipment, we haven't found another one here that comes close, and the price is part of the package. If your bow wears a different badge, the G5 holds the same six arrows and gives you more hood for a lot less money.

Worth Noting

  • Highest price in this group
Our Verdict

Buy it for a Mathews riser with the right mounting provisions: the fit and finish are factory-grade, and six arrows sit exactly where they should.

Check Latest Price
7

TRUGLO Loc-Down Best for Simple Four-Arrow Setups

TRUGLO Loc-Down 4-Arrow Ultra-Quiet Lightweight Composite Vibration-Absorbing

Simple four-arrow setups

Field Score 83/100
Hand
Left-hand convertible
Mount
Twist-Lock
Capacity
4 arrows
Shaft Fit
.229 in. and larger
View on Amazon

The Loc-Down twists onto its mount instead of clipping into a bracket: a turn locks it tight against the riser, and a turn back frees it. That's a simpler mechanism than the cam levers and pins elsewhere on this list, and there's less hardware to work loose over a season.

What we like is how little there is to think about. The double gripper holds arrows with no play, the rubber hood insert keeps the pull quiet, and the composite body stays out of the way on a bow that's already carrying a sight, a rest, and a stabilizer.

Four arrows is the trade: plenty for a whitetail sit and thin if you like a full six. Left-handed shooters do get a real option here, since the Loc-Down converts.

Worth Noting

  • Grippers fit .229 in. shafts and up
Our Verdict

A quiet, light four-arrow quiver that twists on and off in one motion; we point anyone building a simple setup here first.

Check Latest Price

How We Tested Bow Quivers

We started by pulling together quivers that kept showing up in the same conversations—models with adjustable mounts, quiet hoods, and capacities from four to six arrows. We filtered out anything that couldn't be mounted solidly on more than one bow style, then narrowed the field to 12 units. Testing ran for eight months, from late summer through spring, so we saw them in heat, rain, and cold.

Each quiver was mounted on a hunting bow and a target bow, then carried through the places quivers actually live: treestands, ground blinds, spot-and-stalk stalks, and weekly range sessions. We hiked in and out with them, slid them into and out of truck cabs, and brushed through cedar and oak without stopping to protect them. We noted where they snagged, what rattled, and whether the mount shifted after a few miles.

For arrow retention, we loaded each quiver, turned it upside down, and shook it side to side; then we pulled arrows one-handed with gloves on and timed how long it took to reinsert them without looking. We weighed each quiver empty and full on a kitchen scale, checked hood noise by tapping the foam and the shell, and tested built-in lights in a dark garage before dawn. Mounting got its own pass: we adjusted each one through its full range and shot 30 arrows to see if it stayed put.

Durability came from the season itself—dropped quivers, banged hoods, and one accidental slide down a gravel bank. We checked for cracks, loosened screws, and foam that stopped gripping. What we cared about most wasn't a spec sheet; it was whether the quiver stayed quiet and stable after months of real use, and whether it was easy enough to use that we stopped thinking about it.

How to Choose a Bow Quiver

Start With Your Shaft Diameter

Gripper tension is the specification nobody prints on the box, and it decides whether a quiver is quiet or noisy. A gripper cut for .229-inch-and-up shafts swallows a standard carbon and clamps it still; the same gripper lets a .166 micro shaft rock, and a rocking arrow clicks against the hood every time you shift your hand.

If you shoot micro-diameter arrows, buy a quiver whose gripper is built for them. The Apex Reactor is the one here that holds them. Everyone else can shop on other grounds and skip this section.

Match the Hood to the Heads You Carry

A hood does two jobs: it covers blades and it separates arrows so the heads never touch. Fixed blades need depth and slot spacing, and a wide three-blade head takes up more room than a product photo suggests. Mechanicals need the opposite: a gripper that holds the shaft so nothing presses on the blades.

The G5 Head-Loc's Power-Grip spreader is the clearest example here of a hood designed around that second job. Count your widest head and your arrow count before you compare hoods, because a snug hood forces you to load around it all season.

Where the Quiver Mounts, and What That Does to Balance

Most quivers bolt to a bracket on the riser and hang off the side. A few, like the CBE Tactic 5, clamp to the sight and sit inboard, closer to the bow's centerline, which is tidier in brush and changes the balance less. Inboard only works if your sight carries the mounting holes.

Mathews owners have a third option: an archery quiver built for the riser itself. Check the holes you actually have before you fall for a mounting system, because the bracket is the part you cannot change later.

The Detach Is Where Quiet Is Won or Lost

You take the quiver off at the stand, in the dark, with cold hands, so the detach matters more than the specification suggests. A cam lever or a twist-lock that seats without play is worth paying for; a bracket with slack in it rattles on the shot and works loose on the walk in.

Test the mechanism before the season, and pick a quiver you can hang from a limb or a hook once it comes off the bow.

Capacity, Weight, and How Much Bow You Want to Carry

Every extra arrow is more weight at the end of the bow and more hood to catch the wind. Four is a whitetail sit, five covers most compound hunters, and six suits hogs, western trips, or anyone who hates walking back for arrows.

Weight compounds the further the quiver sits from the riser, which is why the lightest five-arrow quiver here, the 5-Spot at 9.1 ounces, feels different from a sixteen-ounce hood with lights in it. Buy the capacity you'll actually fill.

Frequently Asked Questions

Final Verdict

The G5 Head-Loc 6 is the quiver we put on a hunting bow. The spreader holds broadheads of either style by the shaft, the rubber bracket and lined hood keep it quiet, and six arrows is enough for a full sit without going back to the truck.

Change the pick when your ammunition changes. Micro-diameter shooters should take the Apex Reactor, the only quiver here that grips a .166 shaft properly. And if you shoot standard carbons and want to spend less, the Trophy Ridge 5-Spot is lighter and just as quiet.