The 8 Best Lawn Edgers of 2026

This is the only cordless edger here that arrives ready to cut. A 4.0 Ah battery and its charger are in the box, which changes the arithmetic: every other battery machine on this list is a bare tool, so you're really pricing a tool, a pack, and a charger. That difference is easy to miss when you're comparing listings side by side.

We think the kit math is the reason to start here if you're going cord-free. The brushless motor turns an 8-inch steel blade, the depth adjusts without tools, and the curb wheel keeps the line honest when you're running along a driveway lip. On uneven ground it stays composed — this is a machine you steer rather than wrestle, which is not something we can say for every edger in this group.

Runtime is the variable no listing can settle for you. The same 4.0 Ah pack covers a normal suburban edge in one charge and comes up short on a long run of curb, and how much matted sod is in the blade decides which version of the day you get. If your borders are long, a second pack is the honest accessory, not an upsell. The weight is 11.9 pounds with the battery mounted — lighter than any corded machine here, heavier than the manual tools, and it carries that weight forward of the handle where you feel it most.

The blade is steel running against grit, so treat it as a wear item and check the mounting hardware before the season starts. Where this one makes its case is simplicity: no cord to drag around the corner of the house, no outlet to find, and no separate purchase between you and a finished edge. If you already own Greenworks 40V tools, the packs you have make it cheaper still.

This is the most expensive route to a clean edge on this list, and it doesn't include a battery. What you're buying is the power head — a brushless unit on a carbon fiber shaft with a digital two-speed selector — plus the 8-inch edger attachment that clicks onto it. Read the listing carefully before you order, because the pack and charger are a separate line item.

The capability is real. Depth runs up to 3 inches on a guide wheel with an adjustment knob, which is the deepest bite here by a wide margin, and the open side of the guard lets damp soil pass instead of packing in behind the blade — the difference between one pass and three when you're cutting a walk that's grown over. The two-speed selector earns its place too: low for control along a bed line, high when you want to clear a neglected edge quickly.

We think the depth range and the trigger are what you're paying for, and the cost is weight and control. At 10.8 pounds before a battery goes in, held at the end of a shaft, it tells on your forearms before a long border is done, and the handle takes some fiddling to find a position you can live with. That's a fair complaint and not a dealbreaker — just know that this is a tool you'll set down between runs.

Where it wins outright is the platform. That power head takes 12 attachments, so the same battery that edges your drive can run a pole saw, a hedge trimmer, or a bristle brush, and the 5-year tool warranty covers the motor and gearbox. If you already own EGO 56V packs, this is the cheapest way onto the system and the best edger in it; if you don't, price the battery in before you commit.

Nine inches is more blade than any other edger here puts on the ground — a full inch and a half wider than the 7.5-inch corded machines — and that width is the whole reason to pick this one. On a long driveway it means fewer passes to re-cut a line the grass has swallowed, and fewer passes is the difference between a chore you do weekly and one you keep postponing.

We like how little effort that width costs you. The frame is 10 pounds, the lightest of the powered tools in this group, so you're guiding it rather than carrying it, and the guide wheels track the pavement edge without a fight. Depth setting is the one part that takes patience: it holds once you've found the number, but you'll spend a pass or two dialing it in by eye at the start of the season.

It ships as a bare tool, which is the bargain or the trap depending on your garage. If you already own RYOBI 18V packs and a charger, this is the cheapest way to a wide, powerful edge; if you don't, budget for both as part of the purchase. Which pack you clip in decides how long you work between changes, so a compact pack is fine for a front walk and a poor match for a corner lot.

The details are better considered than most: the blade sits behind a guard that keeps clippings off your shins instead of peppering your legs, and the whole thing breaks down small enough to hang on a wall hook. It's the edger we hand someone who has a RYOBI drill and a fence line of curb to keep tidy — the tool that turns the battery they already own into a finished-looking lawn.

Before the first cut, this edger asks you to solve one problem: a 12-amp motor and a 60-inch frame with no battery means a cord, and that cord has to reach every border you own. Get past that and it's the least expensive powered edger here, and it does the job — 4,420 rpm on a 7.5-inch double-edged blade, biting down to 1.5 inches. We'd put it up against machines costing more and expect the same edge at the end of the driveway.

The rest of the package is sensible rather than clever. A spring-assist front wheel takes the effort out of setting blade depth, the auxiliary handle adjusts so you can hold the blade vertical, and the 8-inch wheels roll over a rough apron without digging in. It converts to trenching with the same blade and the same motor, which is a lot of capability for a first edger.

The depth stop is the part we minded. There's one working height, 1.5 inches, and no markings on the adjuster, so you set the wheel by eye and correct after the first pass. Once it's dialed in for your walk it stays there — the annoyance is that you repeat the guesswork every spring. It's also rated at 94 dB, loud enough that hearing protection is a reasonable habit rather than a fussy one.

Build quality is the other caveat: this is a plastic-bodied machine, and the front wheel and depth hardware are where it shows. Check the fasteners before storage and it will hold; ignore them across a wet winter and a wheel can walk off mid-job. For a first edger on a modest lot, that's a risk worth the savings — a shorter, less traveled edging is exactly the job this one handles well.

Manual edging is a technique before it's a tool. You stand the half-moon blade on the line, put your weight on the footplate, rock it back, and step forward. Done that way the cut is cleaner than anything a spinning blade leaves: a straight vertical face with no torn turf along the top, which is the part people actually notice from the sidewalk.

This one gets the physical details right. The manganese steel blade is saw-toothed, so it grabs roots and matted grass instead of skating off them, and the footplate is wide enough for a boot to land flat and drive it. Three positions cover 38 to 42 inches of handle, set with a screw through the shaft, so a tall user can work standing up rather than hunched. The teeth come with a rubber cover, which is more storage safety than most tools here bother with.

Where it stops is where your soil starts. In dry, compacted ground the blade needs several bites for one line, and heavy thatch will have you rocking it back and forth like a lever. You'll also be the motor: a long run of curb is an hour of stepping and lifting, and the cut face sometimes needs a flat shovel behind it to lift the loosened sod.

For a bed line, a front walk, or a short driveway, this is the tool we pick up first — silent, no cord to drag, no battery to remember, and the tidiest finish in this group. It also costs less than any powered tool on the list, which makes it the sensible place to start if you're not sure how much edging your yard actually needs.

Start with the thing that decides whether you'll like this edger: the blade mount. The blade can work loose mid-job, and when it does the cutting stops until you find the nut and tighten it. That's not a reason to skip the tool, but it is a reason to keep a wrench in your pocket and check the mount before every session. Treat it as a five-minute habit and the machine behaves.

The cutting itself is strong. A 12-amp motor spins a 7.5-inch blade at 4,700 rpm, with three depth settings at 1, 1-1/4, and 1-1/2 inches, and the shaft and D-grip handle adjust so you can stand upright rather than stoop. It trenches as well as edges, and the three-year warranty is longer than most of the corded machines here carry.

We think the cutting line indicator is the underrated part: it's a sight on the deck that shows where the blade is meeting the turf, and it's what keeps a long driveway edge from wandering. It's also a light machine at 14 pounds, easy to steer along a walk, and it moves between edging and trenching without a tool. The guard sits close to the blade, so where soil has built up over the concrete you'll make two or three passes instead of one.

Where this lands is the value end of corded edging. It does everything the top pick does in edge mode, with a shorter warranty and a blade mount you have to babysit, and it asks for the same long extension cord. Buy a spare blade when you buy the tool and you'll never lose a Saturday to a dull or missing one.

This one rolls instead of stamping. A 5.5-inch serrated wheel rides against the edge of the pavement and slices turf as you push it forward, so the work lives in your legs and arms rather than in a step-and-rock motion. On a narrow strip between a fence and a walk, or a curve around a bed, that rolling action is easier to control than a half-moon blade you have to reset every few inches.

The build is more considered than the price suggests. Three stainless sections set the handle at 30.7, 44.5, or 58.3 inches, so it can be a long standing tool for one person and a short tool for another, the grip is cushioned, and the blades are CNC-ground and plated against rust. Break it down to the short setting and it stores in a corner of the garage.

It is work, and we won't dress that up. Pushing a rotary blade through established sod takes steady pressure, and the first cut of the season along a grown-over walk is the hardest hour the tool will ask of you. The axle is the maintenance item: grass wraps it, resistance climbs, and the wheel starts dragging until you clear it.

Where it earns its place is the shape of the job. For touch-up work along a short drive, a strip of curb, or a bed you can see from the kitchen window, it's quicker to grab than any powered edger here and it asks for no cord, no battery, and no ear protection. If your borders run long, go powered; if they're the kind you can walk in five minutes, this is the tool that keeps them sharp.