The 8 Best Reciprocating Saw Blades of 2026

Where the DEWALT set is a starter kit, the Milwaukee 12-piece set is a working kit. It includes 6-inch and 9-inch blades in a spread of tooth pitches, and the blades are thicker than the general-purpose norm at .042 and .062 inch. That extra steel is the point: it resists flexing and kinking when a cut gets ugly.

We recommend this set for demolition, nail-filled lumber, and mixed remodeling because it gives you enough duplicates to keep going after a blade dulls. The 1-inch blade height adds strength, and the 12-piece count means you are not stopping a job to run out for one more blade. The real value is having the right heavy-duty blade already in the box, not improvising with a finish blade that is about to give up.

The thick blades are not the first choice for fine, flush cuts, but that is not what this set is for. For a remodel or a saw that sees regular demolition, the extra blades and beefier bodies are worth the step up. We keep this set for the jobs where the DEWALT blades feel like the light option.

Carbide teeth are the reason we recommend this pruning blade for roots and stumps. The three blades are 12 inches long with a coarse 3 TPI tooth count, so they clear chips quickly in green wood and keep cutting when the wood is dirty. A carbon blade can do the same job until it hits grit; the carbide edge is what keeps going.

The 1-inch blade body is stiff enough to push through a root ball without wandering, and the Perma-Shield coating helps keep sap and gum from building up. We like the 12-inch length for limbs that are too thick for a 9-inch blade, but the coarse 3 TPI tooth count is not for finish cuts. It wants to hog material, not leave a furniture-grade edge.

If you are cutting clean limbs, the EZARC 12-inch pack is the more sensible buy. If you are cutting roots in dirt, the Diablo is the one we reach for because the edge survives the abrasion that kills cheaper blades. That is the trade: you get a blade that keeps working when the cut is ugly.

Reach is the reason to choose this EZARC pack. The blades are 12 inches long, which puts another few inches between your saw and a thick limb, and the 6 TPI tooth count is coarse enough to bite into green wood without feeling like a chainsaw ripper. For a homeowner clearing fence lines and low branches, that combination is more useful than a short blade with a fancy tooth geometry.

The chrome vanadium steel and arc-edge design are aimed at reducing friction, and we like the deep gullets for clearing wet chips. The 6 TPI pitch is a good middle ground: faster than a fine wood blade, more controlled than a 3 TPI pruning blade. It is not the tool for dirt-encrusted roots; the edge will not hold up like carbide.

We recommend this pack when you want long reach without carbide pricing. It sits between the budget 9-inch pruning sets and the Diablo carbide blades, and that is a useful place to be. The three-blade count is enough for a weekend of limb work, and the standard shank fits the saws we tried.

Seven blades sounds modest next to a 12-piece kit, but this Bosch set is the one we pack when space is tight. It covers wood, metal, and light demolition with a mix of tooth pitches, including a 6 TPI wood blade and bi-metal blades for metal and nail-embedded lumber. The point is not the count; it is that the profiles are different enough to handle the three cuts that come up most often.

We recommend this as the compact multi-material kit because it does not make you choose between a wood set and a metal set. The bi-metal construction gives the metal and demolition blades a harder edge, and the 6 TPI wood blade cuts cleanly enough for trim and deck boards. For a small toolbox or a truck box, the smaller count is easier to keep organized than a 12- or 25-piece pack.

The set is a repair kit, not a pruning kit. If your work is mostly limbs, a dedicated pruning pack will serve you better; if you need one kit for repairs, the Bosch covers more ground in less space. We kept it in the case with the saw, which is exactly where a compact set belongs.

Nails are what stop a wood blade, and this Milwaukee pack is built around that problem. The five blades are all 9 inches long with a 5 TPI tooth count, an extra-thick body, and bi-metal construction. That combination is designed for wood with nails and bolts, not for clean finish carpentry or pruning.

The 5 TPI geometry removes more material per stroke, which is why it keeps moving when a nail shows up. We like the extra-thick body for the same reason: it stays straighter in a deep cut and resists the flex that turns a blade into a pretzel. The shank fits standard 1/2-inch reciprocating saw clamps, including the Milwaukee and generic saws we tried.

We recommend it for pallets, nail-embedded lumber, and demolition, where a general-purpose wood blade stalls. It is the blade we reach for when we expect to hit metal, and the five-pack means there is another one ready when the first gets tired.

This is the pruning set we hand to someone who wants to try a reciprocating saw in the yard without spending much. You get five 9-inch blades with a 5 TPI tooth count, a carbon-steel edge, and a clear plastic case. For light limb cleanup, fence lines, and small trees, that is a sensible starting point.

The 5 TPI tooth count is coarse enough to bite into green wood, and the 9-inch length is easy to control in tight spots. We like the case more than we expected: it keeps the blades from banging together in a drawer and makes it obvious when you are down to the last one. The blades fit the major reciprocating saw brands we tried, so you are not locked into one tool.

Carbon steel is the trade-off. It takes a sharp edge and cuts clean wood well, but it does not have the wear resistance of carbide in dirty roots or rocky soil. This is a clean-wood pruning blade, not a stump grinder.

We recommend the Caliastro pack for a homeowner with a few overgrown fence lines and a saw that does not see daily use. The five-blade count gives you spares without committing to a bulk box, and the case makes it easy to keep the pruning blades separate from the ones you use on lumber.

Buying blades by the box only makes sense if metal is a steady part of your work. This Diablo pack gives you 25 nine-inch blades with a 14/18 TPI tooth count, a bi-metal body, and the company's Perma-Shield coating. It is aimed at medium metal and auto dismantling, not at wood or pruning.

The 14/18 TPI pattern is the reason it belongs in a metal shop: it leaves a smoother edge than a coarse demolition blade and keeps the cut from grabbing. The dual-tooth design and 1-inch demolition body add stiffness, which we appreciate in a long cut through pipe or sheet. The blades feel substantial in the hand, not like the thin disposables that come in some cheap multi-packs.

The bulk count is the real advantage. If you cut metal regularly, 25 blades means you are not stopping to order another pack every time a tooth chips. The Perma-Shield coating helps with heat and gumming, and the bi-metal construction gives you some tolerance for the occasional hard spot.

We recommend this pack for a shop or a serious DIYer who already has a mixed set for wood. It is not the first pack for someone who mostly prunes trees, and it is not a substitute for a fine-tooth blade in thin sheet. But for repeat metal cutting, the box makes sense.