The 6 Best Table Saws of 2026

At 54 pounds and about 23 inches across, the DWE7485 is the saw we reach for when the shop is a corner of a garage and the saw has to move. The 8-1/4-inch blade is the trade: less depth and fewer blade choices than a 10-inch saw. It still rips 24.5 inches, enough for sheet goods, trim, and the kind of rips a small shop actually makes.

The compact body does not feel disposable. The 15-amp motor and 5,800-rpm speed cut cleanly through the pine and plywood we fed it, and the rack-and-pinion fence moves smoothly and locks parallel. The metal roll cage protects the saw in a truck bed, and the dust port actually works when a vacuum is connected. Onboard storage keeps the push stick and wrenches with the saw instead of in a drawer.

The miter gauge is usable for framing but not for finish crosscuts; a sled is the fix. The 8-1/4-inch blade also limits how deep you can cut and narrows your blade choices. Those are real costs, but they buy a saw that stores on a shelf and can be carried by one person. The 5,800-rpm motor is the detail that makes the small blade feel less like a compromise.

The TS6307-00 is the saw that makes a 10-inch blade and an integrated folding stand feel like a practical first purchase rather than a compromise. The 15-amp motor, 10-inch blade, and 4x4 capacity at 90 degrees cover most trim and framing cuts, and the legs fold into the body for storage. At 51.2 pounds, it is light enough for one person to set up and put away.

The rack-and-pinion fence moves smoothly and stays parallel, and the micro-adjustment for blade alignment is the kind of detail we expect higher up the range. It cut cleanly in our test pieces, and the folding stand kept the saw stable on a flat floor. The 3-year warranty is another point in its favor.

For a first shop saw, this is the value pick in the group. The folding stand is the part that feels built to a price; it works on a flat floor, but it is not as solid as the DEWALT rolling stand. That is the main place the budget shows; the fence, motor, and table feel sorted. For a first saw that will not be moved every day, the trade is easy to live with.

The SPT99-11 is what we reach for when the board is thick and the motor should not be the limiting factor. The worm-drive gearing gives it a 3-5/8-inch depth of cut and enough torque to rip a 4x4 in one pass, and the 30-1/2-inch rip capacity is close to the DEWALT's. This is a saw for oak, timber, and repeated heavy rips.

The rack-and-pinion fence is accurate, and the outfeed and left support make it possible for one person to handle longer stock. The 16-inch wheels make it easier to roll over gravel and thresholds. At 94.3 pounds, it is still a two-person lift into a truck, but it is mobile once it is on its wheels.

The plastic throat plate feels less substantial than the rest of the machine, a reminder that this is still a jobsite saw. At 94.3 pounds, it is not a saw you carry up a ladder; the 16-inch wheels make it mobile on flat ground, but loading it into a truck is a two-person job. The torque is the payoff.

The first thing we noticed on start-up was how gently the GTS15-10 comes to speed. The soft-start circuit takes the jolt out of the motor, and the brake stops the blade in about three seconds, which makes repeated cuts feel less frantic. The 10-inch blade and 32-1/8-inch rip capacity put it in the same capacity class as the DEWALT DWE7491RS, and the rise wheeled stand makes it movable.

The rack-and-pinion fence uses color-coded index pins that make the scale easy to set by eye, and the saw feels planted once the rise stand is down. We liked the brake most when making a run of crosscuts; there is less waiting between passes, and the soft start avoids the usual jolt.

This is the saw we recommend for a shop that wants calmer, more controlled cuts and has a flat path for the wheels. Check the blade-to-miter-slot alignment before the first project; a square and a test cut will tell you whether it needs adjustment. The soft start and brake are the features that keep it in the conversation.

The R10TBLX is the only saw here that lists mild steel, aluminum, and composites alongside wood, and that changes the shopping question. Its 15-amp motor and 3-3/8-inch depth of cut put it in jobsite-saw territory, while the zero-clearance throat plate, dado plate, and crosscut sled add capability the other saws do not match. A 3-year warranty backs it.

What earns it a place is the range: it can switch from wood to aluminum without a second machine, and the zero-clearance plate left cleaner edges on plywood in our cuts. The soft start is welcome on a saw with this much torque, and the crosscut sled is a useful inclusion rather than a box-filler.

The 26-inch rip is enough for most crosscuts but not the widest sheet rips, and the stand takes patience to assemble. Those are fair trade-offs for a saw that can cut aluminum and wood on the same table. If sheet goods are the main job, the DWE7491RS is the better tool.